Frontline PTZ Guide

From Zero Collective Wiki

Click here for the video version of this guide!

PTZ Getting Started

  1. Turn on the controller with the power button on the back right of the device
  2. Remember:
    1. Cam 1 on the controller is equal to Cam 3 as the director calls it out
    2. Cam 2 on the controller is equal to Cam 4 as the director calls it out
  3. Type a number and press call to load a preset
  4. Type a number and hold preset to save a preset
  5. During rehearsal, check the preprogrammed positions and make adjustments as necessary
  6. Add any extra presets in the blank spaces to make sure you can capture almost everyone on stage
  7. Coordinate with the video editor to make sure we have good coverage of all people on stage

Shutdown

  1. Turn off the PTZ controller, the cameras will turn off with the rest of the system